Installation specifications and application scenarios of Two-Point Linkage reclining plastic armrests (brackets)
Two-Point Linkage reclining plastic armrests (brackets) must follow certain specifications during installation to ensure their safety and functionality. At the same time, they are widely used in multiple scenarios. The following is a detailed introduction:
Installation specifications
Determination of installation location: Determine the installation height of the armrest according to usage requirements and ergonomic principles. Generally speaking, the height of the armrest used to assist walking should be between 0.8 and 0.9 meters from the ground; the height of the armrest used to assist standing up can be adjusted appropriately according to the specific usage scenario and population, usually about 0.3 to 0.4 meters from the seat surface. At the same time, ensure that the wall or supporting structure at the installation location is strong and can withstand the pressure that the armrest is subjected to during use.
Wall treatment: Before installation, the wall needs to be cleaned and treated to remove dust, oil stains and unevenness on the surface to ensure that the wall is flat and dry. If there are cracks or holes in the wall, they need to be repaired first to ensure that the handrail fits tightly to the wall after installation.
Punching installation: Use appropriate tools to punch holes at the determined location according to the requirements of the product manual. The depth and diameter of the punching should meet the installation requirements of the handrail bracket. The general depth is about 3-5 cm, and the diameter depends on the specifications of the expansion bolt. Put the expansion bolt into the hole, then fix the handrail bracket to the wall with the bolt, tighten the nut, and ensure that the bracket is firmly installed.
Debugging and inspection: After the installation is completed, debug the handrail to check whether its reclining function is normal and whether the handrail can be put down and raised smoothly. At the same time, check the firmness of the handrail, shake the handrail, confirm that there is no looseness, and ensure safe use.
Application scenario
Home elderly care environment: Install in the bedroom, bathroom and other places of the elderly or those with mobility difficulties to facilitate them to get up and walk to grab and provide safety protection. For example, by installing a reclining plastic handrail beside the bed, the elderly can use the handrail to support their body when getting up at night to reduce the risk of falling; installing it next to the toilet in the bathroom makes it easier for the elderly to get up, and it can also be installed in the shower area as an anti-slip auxiliary facility.
Nursing homes and other nursing institutions: widely used in corridors, rooms, bathrooms and other areas. The handrails in the corridor can help the elderly rest at any time while walking. When the elderly feel tired, they can put down the handrail and sit down. The handrails in the room can meet the elderly's daily living assistance needs and improve their self-care ability.
Medical rehabilitation institutions: In rehabilitation training rooms, wards and other places, reclining plastic handrails help patients with rehabilitation training, such as assisted walking, standing training, etc. Patients can adjust the state of the handrail according to their needs, sit and rest or continue rehabilitation activities.
Barrier-free facilities in public places: such as barrier-free passages and public toilets in shopping malls, subway stations, parks and other places, installing reclining plastic handrails can provide convenience for people with disabilities and people with limited mobility, reflecting the society's care for special people. For example, this type of handrail is installed in the barrier-free passages of subway stations to facilitate passengers to rest and grab while going up and down stairs or walking.
En
Español
